Mehrere USB-Seriell-Adapter

[GuidoS]

Hallo Oliver,

leider nicht. Muss da nicht auch noch ein ".rules" hinter den Dateinamen?
ich verstehe den Inhalt auch nicht ganz. Kann man einen Symlink ttyUSB0 anlegen? Den Port gibt es dann doch bereits...

Das Problem könnte man doch super umschiffen, wenn man die PCHK auch mit einem Symlink, z. B. "ttyLCN" verbinden könnte.

VG
Guido


[ 3.488275] usb 1-1.2: new full-speed USB device number 4 using dwc_otg

[ 3.636004] usb 1-1.2: New USB device found, idVendor=0403, idProduct=6001

[ 3.653499] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[ 3.665404] usb 1-1.2: Product: FT232R USB UART

[ 3.675409] usb 1-1.2: Manufacturer: FTDI

[ 3.688504] usb 1-1.2: SerialNumber: AJ02WIET

[ 3.798268] usb 1-1.3: new high-speed USB device number 5 using dwc_otg

[ 3.918721] usb 1-1.3: New USB device found, idVendor=1a40, idProduct=0101

[ 3.929804] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0

[ 3.941782] usb 1-1.3: Product: USB 2.0 Hub

[ 4.011736] usbcore: registered new interface driver usbserial

[ 4.048411] usbcore: registered new interface driver usbserial_generic

[ 4.079116] usbserial: USB Serial support registered for generic

[ 4.099986] usbcore: registered new interface driver ftdi_sio

[ 4.108589] usbserial: USB Serial support registered for FTDI USB Serial Device

[ 4.132824] usb 1-1.2: Detected FT232RL

[ 4.158423] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0

[ 4.268264] usb 1-1.3.1: new full-speed USB device number 6 using dwc_otg

[ 4.424264] usb 1-1.3.1: New USB device found, idVendor=0403, idProduct=6001

[ 4.438127] usb 1-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[ 4.451379] usb 1-1.3.1: Product: LCN-PKU

[ 4.457675] usb 1-1.3.1: Manufacturer: ISSENDORFF KG

[ 4.464983] usb 1-1.3.1: SerialNumber: 130619

[ 4.490617] usb 1-1.3.1: Detected FT232RL

[ 4.500456] usb 1-1.3.1: FTDI USB Serial Device converter now attached to ttyUSB1

pi@raspberrypi2 ~ $